Mobile Battery Operated Articulated Boom Lift DXQB Series – Indoor & Outdoor Overhead Working Equipment

Mobile lifting machine relies on self-driving battery power to complete all kinds of overhead operations, with six distinct configurations to match different height requirements, covering DXQB-09, DXQB-11, DXQB-14, DXQB-16, DXQB-18 and DXQB-20. The maximum vertical reach varies between 11.5m and 22m, while the actual platform height users can stand on ranges from 9.5m to 20m. The machine's crossing height for passing over obstructions falls between 4.1m and 9.4m, and horizontal outreach extends from 6.5m to 12.23m based on each unit's specs.

Battery boom lifting equipment comes standard with a full set of 48V/420Ah storage batteries, paired with a safe 24V control circuit. Driving motor power stays at 3.3kw, while hydraulic pump power offers two options: 4kw for small models and 12kw for large heavy-duty versions. Load capacity differs across models: basic units hold 200kg, mid-size variants support 230kg, and high-end machines adopt dual load standards of 256kg or 350kg to carry extra construction gear. Multi-angle rotating components greatly expand working coverage: the work basket rotates ±80°, the secondary jib swings ±70°, and the main turntable provides 355° rotation without full circular dead zone. Two travel layouts are selectable: 2*2 front wheel drive for narrow passages and 4*2 all-wheel drive for rough slopes.

Travel speed when folded ranges from 4.5km/h to 5.1km/h, with climbing ability reaching 30% to 45%. The built-in tilt protection system limits operation once ground slope exceeds 3°, ensuring stable lifting performance. Outer turning radius spans 3.2m to 5.0m, and total machine weight differs from 5200kg to 10000kg. Three basket dimensions are available: 1.4*0.7m, 1.4*0.76m and spacious 1.8*0.76m. After full retraction, overall length ranges 3.8m–8.99m, width 1.27m–2.49m and height 2.0m or 2.38m, wheelbase from 1.65m to 2.5m. Compact three small models fit standard 20ft sea containers, while three large units require 40ft containers for shipment. Zero exhaust battery power makes the equipment fit silent indoor maintenance, mall renovation, building construction and municipal overhead work without environmental pollution issues.

Advantages of battery boom lifting equipmentt

1. Battery Driven Emission-Free Operation

Battery boom lifting equipment uses maintenance-free lead-acid batteries with 48V/420Ah capacity, matched with low-noise hydraulic pump and efficient drive motor. No internal combustion engine is installed, so there is no waste gas emission and running noise remains at a low level. This design fully complies with operation regulations for enclosed indoor spaces including shopping centers, storage warehouses, office towers, hotels and exhibition venues. Compared with fuel-powered lifting equipment, battery-driven models slash daily operation expenditure by roughly 60% and eliminate exhaust-related usage restrictions in European, American and Southeast Asian construction sectors.

2. Multi-Joint Foldable Arm For Obstacle Crossing

Segmented folding boom structure delivers excellent crossing performance to bypass overhead barriers such as cross beams, ceiling frames and partition walls, with crossing height covering 4.1m up to 9.4m for the largest DXQB-20 model. Three sets of rotating assemblies work together to expand accessible areas freely: adjustable basket orientation, vertical jib fine-tuning and wide-range turntable rotation. The maximum horizontal outreach of DXQB-20 hits 12.23m, cutting frequent machine relocation during overhead installation, wiring and surface cleaning work.

3. Stable Chassis & Differentiated Load Standards

Lightweight DXQB-09 and DXQB-11 can support a single operator with small tools at 200kg load limit. Mid-range DXQB-14 and DXQB-16 hold two staff members and their tools at 230kg. Heavy-duty DXQB-18 and DXQB-20 support upgraded load capacity up to 350kg for bulky construction accessories. Wide anti-slip rubber tires and extended wheelbase optimize stability on flat concrete floors and smooth outdoor pavements. Two drive configurations meet different site demands: compact front-wheel drive for narrow walkways, all-wheel drive for steep construction slopes with climbing capacity up to 45%. DXQB-14 owns the minimum outer turning radius at only 3.2m, facilitating flexible turning inside parking lots and narrow factory aisles.

4. Retractable Compact Frame Saves Shipping & Storage Cost

After full arm retraction, the whole machine occupies minimal space for warehouse storage and ocean transport. Small-sized DXQB-09 with folded length 3.8m and width 1.27m can be loaded into regular 20ft containers, while extended high-reach DXQB-16 to DXQB-20 need 40ft containers, helping global distributors and rental firms lower sea freight expenses. Folded height controlled at 2.0m or 2.38m allows passage through standard factory gates and indoor overhead door frames without partial disassembly.

Complete Model Parameter Reference Table

Multi-Site Application Range

mobile overhead lifting machine fits various industrial and commercial high-place maintenance tasks across global markets, covering the below mainstream usage scenarios:

• Commercial property upkeep: ceiling renovation, lamp installation, glass window cleaning and exhibition booth assembly for shopping malls, hotels and office towers
• Construction projects: facade coating, steel frame welding, pipeline laying and minor bridge repair for new and renovated buildings
• Factory & storage work: overhead equipment inspection, storage rack setup and ventilation pipe maintenance inside large industrial workshops
• Municipal public service: street lamp maintenance, stadium layout adjustment, airport inspection and park tree trimming at height
• Equipment rental business: short-term hire for decoration crews, long-term leasing for fixed factory daily maintenance

Reasons To Pick This DXQB Series Lifting Equipment

1. Direct factory supply without intermediate dealers. Customization service covers exterior paint shade, brand marking and control system adjustment for global wholesale partners. 

2. International safety certification approval. All DXQB lifting units pass CE and ISO standards, meeting market entry rules for EU, North America and Australia, and can pass local construction authority inspections smoothly.

3. Cross-border after-sales support. 24-month full machine warranty is offered, with ready spare parts stock for quick global dispatch and online video technical guidance for operation and fault elimination.

4. Optional upgrade accessories available. Clients can select non-marking rubber tires to protect indoor flooring, extended work basket, self-diagnosis control panel and arm anti-collision guard according to actual site demands.

5. Low daily running expense. The long-life 48V/420Ah battery delivers continuous 8–10 hour full-load operation within a single shift. Core hydraulic components adopt internationally recognized brands to cut regular maintenance frequency and related fees.

Model Selection Guide Based On Working Demands

- Low-height narrow indoor projects (11.5m–12.52m vertical reach): Choose DXQB-09 / DXQB-11. Compact body fits 20ft sea containers with lower overall procurement cost.

- Mid-rise factory and building routine maintenance (16m–18m vertical reach): Select DXQB-14 / DXQB-16. Balanced crossing height and load capacity match most regular overhead work requirements.

- High-rise construction & heavy tool operation (20.7m–22m vertical reach): Go with DXQB-18 / DXQB-20. 4*2 travel layout supports 350kg maximum load and strong climbing ability for outdoor construction ground.

Frequently Asked Questions About DXQB Lifting Machine