How to properly handle the Materials Handling Equipments after it enters the water?
Water entering the Materials Handling Equipments can easily have an adverse effect on the performance of the Materials Handling Equipments and affect the normal operation and work of the hydraulic system, especially the fixed Materials Handling Equipments installed outdoors. For obviousness, address this frequently asked question.
1. The motor of the fixed lift platform will burn out after water enters. At this time, the power switch should be turned off immediately and the water in the pit should be cleaned up.
2. Try to keep the elevator as high as possible in the front and low in the back, which will help to discharge the water entering the exhaust pipe, so as to avoid damage to the converter and the muffler.
3. The oil condition of each system of the elevator should be checked, and the oil should be replaced in time if it is found that the oil is foaming or turbid.
4. After the inspection, Dasheng elevator manufacturer reminds you that you should use a compressed air machine to dry all the electrical connection parts inside the head bin, so as to avoid water accumulation in the electrical connection parts and cause erosion.
5. If the water has entered the motor of the elevator, then the motor should be removed and the motor should be disassembled so that the water can evaporate quickly. It's a very quick way in summer.
6. During the process of wading in water, the components of the site are likely to cause the deterioration of the lubricating oil. Especially in the steering, transmission and other systems, the site should be disassembled and inspected.
