The required ceiling height for installing a 2 post car parking lift depends mainly on the maximum parking height of the selected model and the height of the column:
1. Required Ceiling Height
1. Standard Model
* Maximum parking height: 2100mm
* Column height: generally around 3m
* Recommended ceiling height: around 3.6m (to accommodate the lifting platform and a certain amount of safety space)
2. Special Models or Requirements
* For supercars with lower vehicle heights (such as Porsche 911, etc.), the platform can be parked at any height below 2100mm, and there are step locks on both sides of the column.
* In this case, the recommended ceiling height can be reduced to around 3.2m (but ensure that there is enough space for the lifting platform to work properly and provide the necessary safety margin).
2. Installation Precautions
1. Measurement and Planning
* Before installation, use measuring tools such as tape measures to accurately measure the length, width, and height of the installation location, as well as the size of the column.
* Draw a detailed installation location diagram based on the size of the vehicle and the parameters of the lift, including the lateral and longitudinal positions to determine the size.
2. Safety Considerations
* Ensure that the ceiling height is sufficient to avoid collision with the ceiling during lifting.
* Install safety devices such as ladder locks on both sides of the column to improve the stability and safety of the system.
3. Customized Service
* If the customer has special parking needs (such as placing other items on the platform), customized services can be provided.
* When customizing, the customer's specific needs and space limitations should be fully considered to ensure that the customized lifting system can meet the customer's actual needs.
4. Manufacturer Technical Support
* During the installation process, the dealer or manufacturer should be contacted for technical support and installation guidance.
* Follow the installation requirements and operating steps provided by the manufacturer to ensure the correctness and safety of the installation process.
5. Regular Inspection and Maintenance
* After installation, the lifting system should be inspected and maintained regularly.
* The inspection content includes but is not limited to the operating status of the lifting platform, the reliability of the safety device, and whether the fasteners are loose.
