What should I do if the Aerial Lifts button is out of control?
The lift is a kind of high-altitude operation equipment. Think about the danger of losing control of the button when the lift is raised to a height of several meters. I tell you, don't be afraid, there are many solutions.
a. There is no need to use electricity when the equipment descends, it descends by its own gravity, and it can descend directly by pressing the "Down" button.
b. Check whether the electrical switch has bad contact or wiring. If there is no bad connection, it can be ruled out that it is a problem with the electrical system. If it is found to be an electrical problem, it can be repaired.
c. Check whether the power supply of the external point is normally powered on. The equipment room cannot rise without power.
d. Check whether the permeability of the oil pipe is normal. The machine reminds everyone to use high-quality hydraulic oil as much as possible.
e. If the solenoid valve is stuck, this situation will also occur. You can first press the top rod of the solenoid valve to make the lifting platform fall down safely, and then clean or replace the solenoid valve.
Summary: Don't panic when the button of the lifting platform is out of control. After ensuring the safe descent of the platform, conduct a comprehensive inspection. All the equipment produced by our company is equipped with an emergency descending valve device to fully protect your safety.
